We provide a variety of smartphone settings guide for those of you who need or just looking for references about smartphones, manual tutorials there are also various tricks that you can read.

Tuesday, April 11, 2017

Huawei P10 User Manual Guide Pdf

Huawei P10 User Manual Guide Pdf
Huawei P10
Unboxing your Phone
 Inserting a SIM card and microSD card
Your phone features a 2-in-1 SIM card slot. You can insert two nano-SIM cards, or one nano-SIM
card and one microSD card.
  • The SIM card slot only supports nano-SIM cards. Contact your carrier for a new or replacement nano-SIM card.
  • Only use standard nano-SIM cards to avoid damaging the SIM card tray.
  • Ensure that the card is in the correct position and keep the card tray level when inserting it into your device.
  • Be careful not to hurt yourself or damage your device when using the SIM eject pin.
  • Store the SIM eject pin out of the reach of children to prevent accidental swallowing or injury.
  • The SIM eject pin should only be used to eject the SIM card tray. Inserting the SIM eject pin into other holes may damage your device.
  1. Touch and hold the power button and touch to turn off your device.
  2. To remove the card tray, insert the SIM eject pin included with your device into the small hole next to the card tray.
simcard



3. Insert a SIM card or microSD card into the card tray.
4. Insert the card tray back into your phone in the correct orientation.

Charging your device
Your device displays a low battery warning when the battery is nearly empty. Charge your device immediately to prevent it from switching off automatically.

Using a charger to charge your device
Connect your device to a socket using the factory-provided charger and USB cable.

You must use the charger and USB cable that came with your device for quicker charging speeds. Using other chargers or USB cables may cause your device to continuously restart or increase the charging time. It may also cause the charger to overheat, or even damage your device.
  • If your device does not respond when you press the power button, the battery is probably empty. Charge your battery for at least 10 minutes (use the charger that came with your device), and then restart your device.
  • Your device automatically conducts a safety check when you connect it to a charger or other devices. If your device detects that the USB port is wet, it will automatically stop charging and display a safety message. If this message is displayed, unplug the USB cable from your device and allow the USB port to dry out completely to avoid damaging your device or battery.
Using a USB port to charge your device
If you do not have access to a charger, you can charge your device by connecting it to a
computer with a USB cable.
  1. When you use a USB cable to connect your device to a computer or another device, Allow access to device data? will be displayed in a popup dialog.
  2. Touch No, charge only. If another USB connection mode has been selected, swipe down from the status bar to open the notification panel. Touch Charging via USB, and then select Charge only. 
Safety information Huawei P10
  • Only use genuine Huawei batteries, chargers, and USB cables to charge your device. Thirdparty accessories are a potential safety hazard and may impair your device's performance.
  • You can recharge your battery many times, but all batteries have a limited lifespan. If you notice a significant deterioration in your device's battery life, purchase a genuine Huawei replacement battery. Do not attempt to remove built-in batteries. If your device has a built-in battery, contact an authorized Huawei service center for a replacement. If the battery is removable, replace it with a genuine Huawei battery.
  • Your device may become warm after prolonged use or when exposed to high ambient temperatures. If your device becomes hot to the touch, stop charging it and disable unnecessary features. Place your device in a cool location and allow it to cool down to room temperature. Avoid touching the surface of your device for prolonged periods when it becomes hot.
  • Charging times may vary depending on the ambient temperature and the remaining battery level.
  • Avoid using your device when it is charging. Do not cover your device or the charger.
For more information on charging and battery care, visit http://consumer.huawei.com/ and
search for your device's user guide.


Getting Started
Initial setup
  • Ensure that the SIM card is inserted correctly before using your phone for the first time. Read the Quick Start Guide for more information on how to set up your phone.
  • Press and hold the power button to turn on your device. Follow the onscreen instructions to complete the initial setup
  1. Select your language and region and touch NEXT.
  2. Read the content carefully, accept the user terms and conditions, and then touch AGREE >AGREE.
  3. Read the app permission information. Select AGREE and touch NEXT.
  4. Read the service policy. Select AGREE and touch NEXT.
  5. Your device will automatically search for available Wi-Fi networks. Follow the onscreen instructions to connect to a network.
  6. Read the Google terms and conditions and touch NEXT.
  7. You can configure your device in two ways:
  • Follow the onscreen instructions to restore a backup.
  • Follow the onscreen instructions to copy data from another device, or touch SET AS NEW PHONE > OK to skip this step.
If you choose to skip this step, you can still import data from another device later by
touching Settings > Advanced settings > Data transmission.
 8. Your device has a fingerprint sensor. Follow the onscreen instructions to add your fingerprint. Before adding your fingerprint, you will be prompted to create a PIN or password which you
can use to unlock the screen if fingerprint recognition fails.
9. Touch GET STARTED to complete the settings. Your device is now ready to use.

Enabling or disabling a SIM card
Enable or disable your SIM card for easier usage and management.
This feature is only available on dual SIM phones.
  1. Open Settings.
  2. Touch Dual SIM management.
  3. Toggle the switch next to the SIM card you want to manage to enable or disable this SIM card.
Disabled SIM cards cannot be used to make calls, send messages, or access the Internet
Naming a SIM card By default, each SIM card is named after the carrier. You can rename your SIM card to make it easier to identify.
  • This feature is only available on dual SIM phones.
  • Features may vary depending on your carrier.
  1. Open Settings.
  2. Touch Dual SIM management.
  3. Select a SIM card. Enter a name and touch OK
Selecting the default mobile data SIM
You can select a default SIM card for mobile data services.
  1. Open Settings.
  2. Touch Dual SIM management.
  3. Toggle the switch Default mobile data next to the selected SIM card.
Connecting to the Internet
Connect to Wi-Fi networks effortlessly with your device.
Connecting to a Wi-Fi network
  1. Swipe down from the status bar to open the notification panel.
  2. Touch and hold to open the Wi-Fi settings screen.
  3. Switch on Wi-Fi. Your device will list all available Wi-Fi networks at your location.
  4. Select the Wi-Fi network you want to connect to. If you select an encrypted network, you will also need to enter the Wi-Fi password on huawei P10.


Huawei P10
Connecting using mobile data
Before using mobile data, ensure that you have a data plan with your carrier to avoid
incurring excessive data charges.
  1. Swipe down from the status bar to open the notification panel.
  2. Touch to enable mobile data.
Phone Manager
Optimizing performance
Use Phone Manager to make your phone run faster and optimize performance.
Open Phone Manager and touch OPTIMIZE. Your phone will automatically optimize
performance, enhance security, and reduce power consumption.
Enhancing speed
Clear the app cache and delete residual files and system trash to optimize performance.
  1. Open Phone Manager.
  2. Touch Cleanup to clear the app cache and system trash.
To free up more storage space, you can:
  1. Touch Storage manager to clear large files, images, and app data.
  2. Restore an app to its default settings. Touch Application restore. Select the app you want to restore and touch > Delete. The app will be restored to its default settings, and all app-specific data will be deleted.
  3. Touch Finish to exit.
Managing email accounts
Adding an email account
  1. Open Email.
  2. Touch > Settings > . Alternatively, On the inbox screen, touch . Touch add account.
  3. Select a service provider and enter your details to add an account. For more information on how to add an account, see Adding an email account.
Switching between email accounts
On the inbox screen, touch . Touch the account image to switch to that account.
Configuring an email account
On the inbox screen, touch > Settings and select an account. You can perform the following operations:
  • Rename the account: Touch Account name and enter an account name in the popup dialog box.
  • Set as default: Switch on Default account to make the account the default account.
  • Delete the account: Touch Remove account to delete the account.
Configuring Mail
Configuring automatic replies
Configure automatic replies when you are out of office.
You must log in to your Exchange account to use this feature.
  1. Open Email.
  2. Touch > Settings.
  3. Choose the Exchange account you want to configure and switch Automatic replies on.
  4. Switch on Automatic replies to configure a message and set the start and end time.
  5. Touch Dne.
Configuring an email signature
  1. On the inbox screen, touch > Settings.
  2. Select the account you want to configure and touch Signature.
  3. Enter a signature and touch OK.
Messaging and Email
Configuring email notifications
  1. On the inbox screen, touch > Settings.
  2. Select the account you want to configure and switch Email notifications on.
  3. Select a notification sound or enable vibration alerts.
Configuring the email view
On the inbox screen, touch > Settings > General. You can configure the following:
  • Only download attachments over Wi-Fi: Switch Don't download images over mobile network on.
  • Group emails with the same title: Switch Organize by subject on.
  • Display contact images: Switch Sender profile picture on to display contact images next to emails.
Configuring how emails are sorted
On the inbox screen, touch > Sort by and select a sort method.
Share:

0 comments:

Post a Comment

Popular Posts

Copyright © Tutorial And Manual | Powered by Blogger Design by Tutorialmanual | Suport by tutorialmanual.com